[cajun]

Who all has done the new tail lights on the 2016-2018 models? I’ve been finding them pretty cheap just don’t want to have to reword shit

 

[BQVTN]

I've read that those are direct replacement, no re-wiring needed. I've been wanting to have them replaced on mine but $500-600 a side is quite expensive.

 

[NavyCuda]

Are the headlights bolt in?

I like the Led low beams but I wish I had LED highs instead of halogen.

 

[R0B0XD]

I don't think they are direct bolt-in. Since they went full LED in the 2020 premium headlights, when comparing the backs of them the connectors do not look like they are pinned the same.

I too hated my halogen highbeam, so I replaced them with aftermarket LED bulbs. Not a perfect solution, but since it's the high beam I just wanted bright and didn't care about glare.

 

[Stephen1173]

I replaced my taillights on my 2018 with 2020+. They are plug and play. You just need a 10mm socket and about 15 minutes.

 

[Relics]

2020+ tail lights will fit, just make sure you get the wiring harness with it as they are different.

2020+ head lights will work as well but you have to buy the wiring adapter made by Z1. It's like $360 for that.

 

[cajun]

View attachment 47357
I replaced my taillights on my 2018 with 2020+. They are plug and play. You just need a 10mm socket and about 15 minutes.

That’s just beautiful!! So did you have to get a harness or anything?

 

[cajun]

I've read that those are direct replacement, no re-wiring needed. I've been wanting to have them replaced on mine but $500-600 a side is quite expensive.

You might want to search around, I’ve found the pair for that, yes a used set but still in brand new condition

 

[Stephen1173]

That’s just beautiful!! So did you have to get a harness or anything?

Just the harness that came with the lights. I got them on ebay.

 

[cajun]

Ok

 

[Bubbabmerkin]

My 17 pro 4x was good to go just swap out